CHUNGSOO TECHNOFIL

CHUNGSOO TECHNOFIL

PREFLOW I

PREFLOW I-1

Introduction

The diamond pattern of PREFLOW I was designed by computer, so the density of filter media is getting higher from the filter surface to inside of the filter. This structure provides the excellent dust holding capacity.

PREFLOW I uses its matrix 100% to retain from the particles. With the characteristics, PREFLOW I is suitable for high density liquid, and it can be used in high temperature and pressure. The removal rating is available from 0.5µm to 200µm

Benefits

  • Used for pre-filtration in various industries.
  • Excellent dust holding capacity
  • Used for high density, temperature, and pressure operating condition
  • Low differential pressure
  • Long life time

Application

  • General process industry
  • Petro-chemical industry
  • Chemical industry
  • Food & Beverage industry

Specification

Dimension Length(mm) 250 / 500 / 750 /1000
Inner diameter(mm) 28 / 30
Outer diameter(mm) 62, 68(with cage)
Material Media(yarn) PP / Cleaned PP / cotton / Bleached cotton / Rayon / Glass
Core PP / Reinforced PP / SUS304
Out cage & End parts Silicone / EPR / Viton / FEP encapsulated
End caps Foamed PE
Seal materials Silicone / EPR / Viton / FEP encapsulated
Operating Conditions Max Temperature(°C) PP(85) / Cotton(130) / Rayon(230) / Glass(400)
Max ΔP(Kgf/cm2) 4.5

Order Information

End style Media Core Gasket Length Inner / Outer
diameter
Micron Rating
B: Standard
G: Foamed PE
End-Cap
S: Foamed PE
gasket
P: PP End-cap
2: 226/Flat
3: 222/Flat
(E : E/O type)
7: 226/Fin
8: 222/Fin
1:General P.P
2:Cleaned P.P
3:Natural Cotton
4:Bleached Cotton
1:Regular
P.P(85°C)
2:Reinforced
P.P(100°C)
3:SUS304
Z : Non option
(Standard)
P : Foamed P.E
S : Silicone
E : Epdm
V : Viton
F : FEP
Encapsulated
1:250mm
2:500mm
3:750mm
4:1000mm
1:ID – 30mm
OD- 62mm
3:ID – 28mm
OD – 62mm
1
3
5
10
25
50
75
100
125
150
200