CHUNGSOO TECHNOFIL

CHUNGSOO TECHNOFIL

MULTIFLOW

MULTIFLOW-1

Introduction

MULTIFLOW has seven cartridge filters inside of PP Capsule. MULTI FLOW was designed to adapt to the filtration system easy and keep the work place clean. During the filtration process, it is blocked from the outside perfectly.

MULTI FLOW has inlet and outlet valves inside of the capsule, so during the replacement, It minimizes the possibility of the secondary contamination.

Benefits

  • The cartridge filters are selectable to setup
  • Easy to change
  • Able to keep work place clean
  • Able to prevent the secondary contamination

Application

  • Magnetic paints
  • General paints
  • Noxious liquids
  • Bulk chemicals
  • Solvent filtration

Specification

Dimension Length(mm) 250 / 500
Material Capsule parts Melt-blown PP, PES Membrane, PTFE membrane
Media polypropylene / Cotton / Acryl / PTFE / PES
Core polypropylene
O-ring Silicone
Q’ty of cartridge(pcs) 7
Type of cartridges Wound depth / Wound non-woven depth / P.P pleated / Membrane
Operating Conditions Max ΔP(Kgf/cm2) 10
Loss of liquid(liter) 250L – 7.2 / 500L – 14

* PES (Polyether sulfone)
* PTFE (Polyetrafluoroethylene)
* PVDF (Polyvinylidene fluoride)

Order Information

Filter Item Media Air Vent Gasket Length of
filter
Grade Micron
Rating
W : Wound
Depth
N : Non Woven
Depth
P : PP Pleated &
Membrane
1:General P.P
2:CLEANED P.P
3:Natural Cotton
P: PP
(Melt blown)
S: PES
Membrane
T: PTFE
Membrane
N: Nylon
Membrane
V : O
Z : X
S :
Silicone
1:250mm
(9.75″)
A: Absolute Rating,
Hydrophobic
PTFE Absolute Rating
N: Nominal Rating
G : PES, Nylon Standard
Absolute Rating
D : Dura PES Rating
W : Hydrophilic
PTFE Absolute Rating

H : High Flux Nylon
Absolute Grade

0.04 ~ 200
(All grade)