CHUNGSOO TECHNOFIL

CHUNGSOO TECHNOFIL

MEGAFLOW

MEGAFLOW-1

Introduction

MEGAFLOW is designed for the high flow rate. The wider effective filtration area makes the flow rate higher and longer life time. Therefore it is not necessary to change the filter often and convenience to replace.

MEGAFLOW is available with various filter media, such as PP melt blown, PES membrane, PTFE membrane, Nylon 66 membrane.

Benefits

  • Enlarged filter area
  • Optimized cartridge design

Application

  • PTFE membrane
    - Concentrated acids and bases
    - Rinses and solvents
    - Solvents filtration
    - Etchants
    - Photo resists
    - Chemicals
  • PES membrane
    - Drugs and Biological industries
    - Beverage
    - Film industry
    - Cosmetic industry
    - Electronic industry
  • PP
    - General process industry
    - Chemical industry
    - biological industry
  • Nylon 66 membrane
    - Chemical delivery system
    - Photoresists
    - Solvents

Specification

Dimension Length(mm) 240
Inner diameter(mm) 36
Outer diameter(mm) 85
Effective area(m2) PP : 0.6 ~ 1.2, PES : 0.97, PTFE : 1.48 (10″ cartridge)
Material Main Media Melt-blown PP, PES Membrane, PTFE membrane
Support mesh polypropylene
Core & Out cage polypropylene
Seal materials Silicone / EPR / Viton / FEP encapsulated
Operating Conditions Max Temperature(°C) 85
Max ΔP(Kgf/cm2) 2.5

Order Information

END STYLE MEDIA Materials of Core Gasket Length of filter Grade Micron Rating
2 : 226/FLAT
3 : 222/FLAT
P: PP
(Melt blown)
S: PES Membrane
(Polyether-sulfone)
T: ePTFE Membrane
N: Nylon Membrane
1:Regular
P.P(85°C)
S : Silicone
E : Epdm
V : Viton
F : FEP
Encapsulated
1 : 240mm A:PP Absolute Rating,
Hydrophobic
PTFE Absolute Rating
N: PP Nominal Rating
G : PES, Nylon Standard
Absolute Rating
D : High Flux Dura PES
W : Hydrophilic
PTFE Absolute Rating

H : High Flux Nylon
Absolute Grade

* Micro
Rating

* Micro Rating

  • PP – A0.6, A0.8, A1.2, N0.1, N0.2, N0.45, N0.6, N1, N5, N10, N20, N40
  • PES – Standard PES G0.04, G0.1, G0.2, G0.45, G1.2 / Dura PES D0.2, D0.45
  • PTFE – Hydrophobic – A0.1, A0.2, A0.45, A1 / Hydrophilic – W0.2, W0.45, W1
  • NYLON – Standard Nylon G0.2 , 0.45 / High Flux H0.2, H0.45