CHUNGSOO TECHNOFIL

CHUNGSOO TECHNOFIL

MAXFLOW

MAXFLOW-1

Introduction

MAXFLOW is designed to improve MEGAFLOW. MAXFLOW has much wider effective filter area than MEGAFLOW. It makes higher flow rate, and long life time than MEGAFLOW’s.

MAXFLOW is also available with various filter media, such as PP melt blown, PES membrane, PTFE membrane, and Nylon membrane.

View PDF Catalogue

Benefits

  • Enlarged filter area
  • Optimized cartridge design

Application

  • PTFE membrane
    - Concentrated acids and bases
    - Rinses and solvents
    - Solvents filtration
    - Etchants
    - Photo resists
    - Chemicals
  • PES membrane
    - Drugs and Biological industries
    - Beverage
    - Film industry
    - Cosmetic industry
    - Electronic industry
  • PP
    - General process industry
    - Chemical industry
    - biological industry
  • Nylon 66 membrane
    - Chemical delivery system
    - Photoresists
    - Solvents

Specification

Dimension Length(mm) 271
Inner diameter(mm) 52
Outer diameter(mm) 131
Effective area(m2) PP : 1.63 ~1.89, PES : 2.1 PTFE : 2.1 (10″ cartridge)
Material Main Media Melt-blown PP, PES Membrane, PTFE membrane
Support mesh polypropylene
Core & Out cage polypropylene
Seal materials Silicone / EPR / Viton / FEP encapsulated
Operating Conditions Max Temperature(°C) 75
Max ΔP(Kgf/cm2) 2.1

Order Information

Media Mesh Materials of Core Gasket Length of filter Grade Micron Rating Option
P: PP
(Melt blown)
S: PES Membrane
(Polyether-sulfone)
T: ePTFE Membrane
N: Nylon Membrane
1:PP Soft
2:PP Hard
3:PET Hard
4.Aperture Film
1:Regular
P.P(85°C)
S : Silicone
E : Epdm
V : Viton
F : FEP
Encapsulated
1:250mm(9.75″) A:PP Absolute Rating,
Hydrophobic
PTFE Absolute Rating
N: PP Nominal Rating
G : PES, Nylon Standard
Absolute Rating
D : High Flux Dura PES
W : Hydrophilic
PTFE Absolute Rating

H : High Flux Nylon
Absolute Grade

* Micro
Rating

C :
Flush &
Dry

W:
Pre wet

S :
Steriliza-tion

* Micro Rating

  • PP – A0.6, A0.8, A1.2, N0.1, N0.2, N0.45, N0.6, N1, N5, N10, N20, N40
  • PES – Standard PES G0.04, G0.1, G0.2, G0.45, G0.6, G1.2 / Dura PES D0.2, D0.45, D0.6
  • PTFE – Hydrophobic – A0.05, A0.1, A0.2, A0.45, A0.6, A1, A3, A5 / Hydrophilic – W0.2, W0.45, W1, W3
  • NYLON – Standard Nylon G0.2 , 0.45 / High Flux H0.2, H0.45