CHUNGSOO TECHNOFIL

CHUNGSOO TECHNOFIL

CAPSULEFLOW

Introduction

CAPSULEFLOW is the filter packaging the pleated media in the small capsule. CAPSULEFLOW is very suitable for the filtration of expensive liquid, and also good for preventing the secondary contamination.

CAPSULEFLOW’s effective area is small, so absorption of the liquid is also small, therefore CAPSULEFLOW is very economical for the expensive liquid.

Benefits

  • Optimized cartridge design
  • Wide range of application
  • Wide chemical compatibility
  • All polypropylene parts, support layer and thermal welding for minimizing extracts
  • 100% integrity test

Application

  • PTFE membrane
    - Concentrated acids and bases
    - Rinses and solvents
    - Solvents filtration
    - Etchants
    - Photo resists
    - Chemicals
  • PES membrane
    - Drugs and Biological industries
    - Beverage
    - Film industry
    - Cosmetic industry
    - Electronic industry
  • PP
    - General industry
    - Petro-chemical industry
    - Biologic industry
  • Nylon 66 membrane
    - Chemical delivery system
    - Photoresists
    - Solvents

Specification

Dimension Length(mm) 100
Inner diameter(mm) 6
Outer diameter(mm) 64
Material Main Media Melt-blown PP, PES Membrane, PTFE membrane
Support mesh polypropylene
Core & Out cage polypropylene
Seal materials Silicone / EPR / Viton / FEP encapsulated
Operating Conditions Max Temperature(°C) 90
Max ΔP(Kgf/cm2) 7.5

Order Information

   
Media Materials of Support Materials of Parts Grade Micron Rating
P: PP
(Melt blown)
S: PES Membrane
(Polyether-sulfone)
T: PTFE Membrane
N: Nylon Membrane
V: PVDF (Nano fiber)
PP PP A:PP Absolute Rating,
Hydrophobic
PTFE Absolute Rating
N: PP Nominal Rating
G : PES, Nylon Standard
Absolute Rating
D : Dura PES Rating
W : Hydrophilic
PTFE Absolute Rating

H : High Flux Nylon
Absolute Grade

[PP] A0.6, A0.8, A1.2, N0.1, N0.2,
N0.45, N0.6, N1, N5, N10, N20, N40
[PES]
Standard PES
G0.04, G0.1, G0.2, G0.45, G1.2
Dura PES
D0.2, D0.45
[PTFE]
Hydrophobic
A0.1, A0.2, A0.45, A1
Hydrophilic
W0.2, W0.45, W1
[NYLON]
Standard Nylon G0.2, G0.45
High Flux H0.2, H0.45